kit information

Colour Tubes Kit Information

Our simple to use vehicle touch up paint is available in three unique kits depending on the level of paint repair you’re wishing to achieve. Simply enter the make, model and year of your car via our vehicle search form to view the available colours, then select your desired touch up paint kit on the product page and proceed to checkout. We deliver New Zealand wide. Alternatively, you can search for your vehicle’s paint colour code via the form below. We’ve also put together this handy guide on where to find this code depending on your vehicle.

Simple Kit

Simple Paint Chip Repair Kit

This kit is for when you simply want some touch up paint to make a few stone chips or scratches look better.

With the purchase of a Simple Chip Repair kit you receive;

  • 2 x Pre-Treatment Wipes
  • 2 x 3ml Colour Tubes, colour of your choice
  • 3 x Microbrushes

Application Instructions:

  1. Clean the area to be repaired using pre-treatment wipes. Wipe dry.
  2. Cut the tip off the Colour Tube according to the desired size, usually a smaller hole is best.
  3. Apply a small amount of paint onto the microbrush directly from the tube.
  4. Apply paint to the chip or scratch, remember less is more.
  5. As the paint dries it levels very well, the colour can also change a lot. Please do not judge the colour before it dries.
  6. If you wish to build in layers it is best to give it as much time as you can between layers, 10 minutes being the minimum an hour being optimal.
  7. In areas of poor ventilation or high humidity, assistance with a fan or hairdryer can help.
  8. Avoid harsh polishing or buffing for a period of 7 days
  9. You can reseal the Colour Tube using the supplied reseal stickers or use piece of tape if desired. It is best to clean the end of the tube with the precleaning wipes before resealing.
Simple Kit

Simple Plus Paint Chip Repair Kit

This kit is for when you want some touch up paint to make a few stone chips or scratches look better and want the added benefit of using a squeegee to apply the paint and have some Finishing solution wipes to remove the excess paint

With the purchase of a Simple Chip Repair kit you receive;

  • 2 x Pre-Treatment Wipes
  • 2 x Finishing solution wipes
  • 2 x 3ml Colour Tubes, colour of your choice
  • 3 x Microbrushes
  • 1 x Squeegee

Application Instructions

  1. Clean the area using the provided pre-treatment wipes and wipe dry.
  2. Cut the tip of the Colour Tube to your desired size. A smaller hole gives better control.
  3. Apply a small amount of paint onto the microbrush or squeegee directly from the tube.
  4. Gently apply paint to the chip or scratch. Use the squeegee to spread evenly if needed.
  5. Let the paint dry fully. It will self-level and the colour may change as it cures. Do not judge the colour while wet.
  6. If layering is needed, wait at least 10 minutes between coats (1 hour is ideal for best results).
  7. Use a fan or hairdryer in case of high humidity or low airflow to assist drying.
  8. Once fully dry, use the finishing solution wipes to clean any excess paint from the surface.
  9. Avoid polishing or buffing the repaired area for at least 7 days.
  10. To reuse, clean the tube tip with a wipe and reseal it using the supplied sticker or a small piece of tape.
Deluxe Kit

Deluxe Auto Touch Up Kit

This kit is for when your getting serious about making the chips and scratches disappear and are happy to invest a bit more time.

With the purchase of a Dulux Kit you receive;

  • 3 x 3ml Colour Tubes, colour of your choice
  • 3 x Pre-Treatment Wipes
  • 1 x 100ml bottle of Finishing Solution
  • 1 x Micro Fibre Cloth
  • 3 x Wiping Cloths
  • 3 x Microbrushes
  • 1 x Squeegee

Application Instructions:

  1. Clean the area to be repaired using pre-treatment wipes. Wipe dry.
  2. Cut the tip off the Colour Tube according to the desired size, usually a smaller hole is best.
  3. Apply a small amount of paint either onto the squeegee, brush or directly to the chip.
  4. Use the squeegee to level the paint into the chip if required.
  5. Allow the paint to dry for 2-3 minutes. In areas of poor ventilation or high humidity, assistance with a fan or hairdryer can help.
  6. As the paint dries it levels very well, the colour can also change a lot. Please do not judge the colour before it dries.
  7. Once dry apply a liberal amount of finishing solution to the wiping cloth, keeping the cloth flat rub over the repair until the excess paint has been removed.
  8. Wipe dry and clean the surface with the microfibre towel.
Deluxe UV Kit

Deluxe Auto Touch Up Kit + UV Clear

This kit is for when you are looking to get the best possible result and you think you have some skill in this sort of thing.

With the purchase of a Dulux Kit you receive;

  • 3 x 3ml Colour Tubes, colour of your choice
  • 1 x UV 1ml cured clear (gloss is default if Matte not specified)
  • 3 x Pre-Treatment Wipes
  • 1 x 100ml bottle of Finishing Solution
  • 1 x Micro Fibre Cloth
  • 3 x Wiping Cloths
  • 3 x Microbrushes
  • 1 x squeegee
  • 1 x UV Torch
  • 1 x Mixing cup

Application Instructions:

  1. Clean the area to be repaired using pre-treatment wipes. Wipe dry.
  2. Cut the tip off the Colour Tube according to the desired size, usually a smaller hole is best.
  3. Apply a small amount of paint either onto the squeegee, brush or directly to the chip.
  4. Use the squeegee to level the paint into the chip.
  5. Allow the paint to dry for 2-3 minutes. In areas of poor ventilation or high humidity, assistance with a fan or hairdryer can help.
  6. As the paint dries it levels very well, the colour can also change a lot. Please do not judge the colour before it dries.
  7. You are only looking for opacity with the colour — there is no need to try and fill the chip/scratch. At this point if your colour

Loading...